Here you will find information on decal placement for your Stan’s Notubes decals.
Symmetric models
Including Stan’s Flow EX3, S2 (all models), Crest CB7, Grail CB7, Podium SRD.
- Decal placement is the same for both sides of the rim.
- There are 7 decals in total per rim.
- With the valve in the 6 o’clock position, position the rim model decals at positions 3 and 9 o’clock on both sides of the rim. Refer to your decal sheet for the correct distance between the decal and the outside edge of the rim.
- Position the Stan’s logos opposite the valve on both sides of the rim.
- Locate the valve hole decal over the valve hole and apply longitudinally.
Asymmetric models
Including Stan’s MK4 (all models), Flow CB7, Baron CB7.
- The model name decals and Stan’s logo decals are specific to the long and short sides of the rim. Decals for the long side have slightly less curve. On the decal backing sheet, each decal is labelled with long or short side.
- Use one complete decal sheet for each rim to ensure the correct quantity of each decal type.
- Decal placement is the same for both sides of the rim.
- There are 7 decals in total per rim.
- With the valve in the 6 o’clock position, position the rim model decals at positions 3 and 9 o’clock. Refer to your decal sheet for the correct distance between the decal and the outside edge of the rim.
- Position the Stan’s logos opposite the valve on both sides of the rim.
- Locate the valve hole decal over the valve hole and apply longitudinally.